RND2000 Netgear
- fbmonte
- Autore della discussione
- Visitatori
12 Anni 1 Mese fa #49
da fbmonte
fbmonte ha creato la discussione RND2000 Netgear
Duo / NV / NV+ / X6/600
To perform an OS Re-install or Factory Default, this is managed via the Reset button on the back of the chassis.
Locate the reset pinhole.
ReadyNAS X6/600: the pinhole is on the back in the lower left corner.
ReadyNAS Duo/NV/NV+: the pinhole is next to the USB port in the back.
Get a straightened paper clip and depress the hidden switch in the pinhole while the power is off, and then power on the ReadyNAS.
To perform other options such as Skip Volume Check, Tech Support Mode, and Memory Test, this is managed via the Power button.
With the system off, hold down the Power button, and wait for the desired LED flashes.
Release the Power button when the option you desire is active.
Systems with an LCD (NV+) will also display the boot menu item text on the LCD at each stage.
Button to Hold Time to Hold LED flashes Boot Menu Mode
Power 5 seconds 1 Skip Volume Check
Power 10 seconds 2 TFTP Boot
Power 15 seconds 3 Tech Support Mode
Power 20 seconds 4 USB Boot
Power 25 seconds 5 Memory Test
Reset 5 seconds 1 OS Re-install
Reset 30 seconds 2 Factory Default
To perform an OS Re-install or Factory Default, this is managed via the Reset button on the back of the chassis.
Locate the reset pinhole.
ReadyNAS X6/600: the pinhole is on the back in the lower left corner.
ReadyNAS Duo/NV/NV+: the pinhole is next to the USB port in the back.
Get a straightened paper clip and depress the hidden switch in the pinhole while the power is off, and then power on the ReadyNAS.
To perform other options such as Skip Volume Check, Tech Support Mode, and Memory Test, this is managed via the Power button.
With the system off, hold down the Power button, and wait for the desired LED flashes.
Release the Power button when the option you desire is active.
Systems with an LCD (NV+) will also display the boot menu item text on the LCD at each stage.
Button to Hold Time to Hold LED flashes Boot Menu Mode
Power 5 seconds 1 Skip Volume Check
Power 10 seconds 2 TFTP Boot
Power 15 seconds 3 Tech Support Mode
Power 20 seconds 4 USB Boot
Power 25 seconds 5 Memory Test
Reset 5 seconds 1 OS Re-install
Reset 30 seconds 2 Factory Default
Si prega Accedi a partecipare alla conversazione.
- fbmonte
- Autore della discussione
- Visitatori
12 Anni 1 Mese fa - 12 Anni 1 Mese fa #51
da fbmonte
fbmonte ha risposto alla discussione Re:RND2000 Netgear
Se compare Root Corrupt, bisogna creare un firmware tramite usb
scaricare dal sito l'ultima immagine FLASH
readynas_usb_flash_recovery-4.1.8
e poi creare con una chiavetta usb, che poi verrò azzerata il disco di boot
per creare la chiavetta, utilizzare questo programma:
dopodichè , inserire la chiavetta a rnd spento, eccendere e tenere premuto il pulsante start per 20 sec
ogni 5 sec abbiamo un lampeggio dei 2 dischi --- vedi sotto le segnalazioni dell' RND2000
scaricare dal sito l'ultima immagine FLASH
readynas_usb_flash_recovery-4.1.8
e poi creare con una chiavetta usb, che poi verrò azzerata il disco di boot
per creare la chiavetta, utilizzare questo programma:
dopodichè , inserire la chiavetta a rnd spento, eccendere e tenere premuto il pulsante start per 20 sec
ogni 5 sec abbiamo un lampeggio dei 2 dischi --- vedi sotto le segnalazioni dell' RND2000
Ultima modifica: 12 Anni 1 Mese fa da fbmonte.
Si prega Accedi a partecipare alla conversazione.
- fbmonte
- Autore della discussione
- Visitatori
11 Anni 3 Mesi fa #179
da fbmonte
fbmonte ha risposto alla discussione Re:RND2000 Netgear
Per un corretto utilizzo come dispositivo di backup,
disinstallare tutti i programmi aggiuntivi
( torrent, photo, ecc ecc ) ed anche i protocolli....
tenere attivo solo il protocollo di windows
disinstallare tutti i programmi aggiuntivi
( torrent, photo, ecc ecc ) ed anche i protocolli....
tenere attivo solo il protocollo di windows
Si prega Accedi a partecipare alla conversazione.
- fbmonte
- Autore della discussione
- Visitatori
- fbmonte
- Autore della discussione
- Visitatori
Tempo creazione pagina: 0.140 secondi
- Sei qui:
- Home
- Forum
- Forum
- Sistemistico / Hardware
- RND2000 Netgear